Leave Your Message

Yamaha KV8-M7162-10X Controls Mounter Z-axis Lift Motion with 56W Powerful Output

KV8-M7162-10X is an original 56W high-power solenoid valve specially configured for the Z-axis lifting mechanism of classic Yamaha placement equipment. The high-power coil outputs stable high-pressure airflow with ultra-short response time under standard 0.3–0.6MPa air pressure range. Reinforced valve core and multi-layer composite sealing greatly lower air leakage rate. It supports stable vertical lifting of heavy-duty suction rod assemblies, improves mounting depth consistency, and guarantees long-term stable high-load running of automated SMT PCB production lines.

    Shenzhen TY Electronic Technology Co., Ltd.

    product description

    • 电磁阀56W
    • Stable Power Output for Heavy Suction Rod Z-axis Vertical Lifting

      The Yamaha KV8-M7162-10X 56W solenoid valve serves as the core pneumatic power component driving the Z-axis up-and-down movement of heavy multi-nozzle suction rods. When picking large-size power ICs, crystal modules and plug-in connectors, the suction rod bears obvious structural load, which low-power valves cannot drive smoothly. This high-power valve provides steady instantaneous thrust to ensure uniform lifting speed and fixed descending stroke of the suction head. Accurate Z-axis displacement effectively prevents excessive pressure from crushing PCB pads and components, improving the mounting qualification rate of new energy vehicle power board assembly workshops.

    • Constant Air Pressure Control for Consistent Component Mounting Depth

      Unstable air pressure from ordinary valves easily causes inconsistent pressing depth when the nozzle attaches components to solder pads, triggering virtual soldering or pad damage defects. This 56W high-power Yamaha Z-axis control valve adopts optimized internal runner structure to stabilize output air pressure in a fixed threshold. The controllable descending force keeps each electronic component attached to the PCB with standard pressure, balancing the contact force between the nozzle and circuit board. Uniform mounting depth reduces post-wave soldering repair volume and stabilizes the welding yield of automotive ECU control board precision processing production lines.

    • 未标题-2
    • 未标题-4
    • Instant Air Cutoff Buffer to Avoid Mechanical Impact During Head Reset

      Frequent high-speed reciprocating lifting of the placement head will produce rigid collision impact when the Z-axis mechanism resets to the origin position in long-hour continuous production. The rapid air cutoff and pressure buffering function of KV8-M7162-10X high-power solenoid valve releases residual air pressure gently during head reset to form soft pneumatic buffer. It reduces vibration impact on precision mechanical structures such as guide rails and bearings inside the placement head, slows down mechanical wear speed, extends the service life of expensive head assemblies, and cuts the equipment overhaul cost for medium and large EMS electronic manufacturing factories year by year.

    • High-load Anti-aging Performance for Round-the-clock Uninterrupted Production

      Continuous frequent switching under full load will lead to coil overheating, performance attenuation and sealing aging for ordinary low-power solenoid valves. The upgraded heat dissipation design of this Yamaha Z-axis dedicated solenoid valve dissipates working heat efficiently under long-term high-frequency actions to maintain stable coil operating temperature. Wear-resistant valve core materials resist long-term scouring of high-speed airflow and delay component aging failure. It reduces unexpected equipment downtime caused by Z-axis pneumatic faults, raises the overall operation rate of Yamaha placement machines, and brings stable production benefits to three-shift uninterrupted intelligent SMT processing plants.
    • 未标题-5

    Leave Your Message